tfaour/espresso_frame
1
0
Fork 0
Code Issues 2 Pull Requests Actions Packages Projects Releases 13 Wiki Activity

Add server-side support for a second panel (13.3in Spectra 6 / EE02) and scaffold its firmware target
Build and push server image / test (push) Successful in 45s
Details
Firmware build check / build-check (push) Successful in 2m50s
Details
Build and push server image / build-and-push (push) Successful in 4m36s
Details
Build and push server image / deploy (push) Failing after 1m34s
Details

Browse Source 
Server: Frame.panel_type (new column + migration) is auto-derived from
the device's reported board (X-Frame-Board), never user-set -- the
panel is a property of the hardware, not a picker in the UI.
image_pipeline's packing/render pipeline is parameterized by panel
geometry instead of hardcoded 800x480 globals, with the real confirmed
13.3in geometry (1600x1200) registered alongside the original 7.3in
panel. Existing 7.3in frames are unaffected (column default + board
mapping both resolve to the original panel).

Board identifiers are also renamed (devkit/xiao -> devkit_esp32c6/
xiao_esp32c6, plus new "ee02") since the EE02 board also carries a XIAO
module -- "xiao" alone stopped disambiguating hardware. The server
keeps accepting the legacy bare names indefinitely for already-flashed
devices.

Firmware: scaffolds a third build target (ee02, ESP32-S3 -- a real
chip-target change, not just a same-chip Kconfig variant like xiao) and
a new epd13in3e driver component skeleton. The actual panel init/LUT/
refresh register sequence isn't ported from vendor demo code yet (none
was available), so that component deliberately fails to compile
(#error) rather than risk sending unverified register values to real
hardware -- devkit/xiao are unaffected and build identically to before.
CI's ee02 build step is continue-on-error for the same reason.
This commit is contained in:
tfaour
2026-08-04 20:08:22 +00:00
parent 1d39e439ff
commit 474b92a282
44 changed files with 1287 additions and 172 deletions
Download Patch File Download Diff File Expand all files Collapse all files
.claude/skills/build-firmware/setup.sh
+7 -6
View File
@@ -45,14 +45,15 @@ else
echo "esp-idf already cloned at $IDF_DIR"
fi
# 3. Toolchain + Python virtualenv, scoped to esp32c6 only -- this
# project's one target (see firmware/README.md's board table). Scoping
# avoids downloading toolchains for every chip ESP-IDF supports, which
# matters given this container's disk headroom. install.sh is already
# 3. Toolchain + Python virtualenv, scoped to esp32c6+esp32s3 only --
# this project's two chip targets (see firmware/README.md's board
# table: devkit/xiao are esp32c6, ee02 is esp32s3). Scoping avoids
# downloading toolchains for every chip ESP-IDF supports, which matters
# given this container's disk headroom. install.sh is already
# idempotent on its own (checks what's present and skips it), so this
# always calls it rather than trying to duplicate that check here --
# a re-run only costs a few seconds once everything's cached.
echo "running esp-idf install.sh esp32c6 (fast if already installed) ..."
(cd "$IDF_DIR" && ./install.sh esp32c6)
echo "running esp-idf install.sh esp32c6,esp32s3 (fast if already installed) ..."
(cd "$IDF_DIR" && ./install.sh esp32c6,esp32s3)
echo "setup complete -> $IDF_DIR/export.sh (build.sh sources this for you)"