Battery (firmware + server, disabled by default): new battery.c reads
a 2x200k voltage divider via ADC oneshot with curve-fitting calibration
(the ESP32-C6's scheme), maps through a piecewise LiPo discharge curve,
and restores the pin to button duty after each read -- the settled
XIAO ESP32-C6 design shares the back button's GPIO0/A0, time-shared per
wake. Skipped entirely when on mains (a 2x100k VBUS divider into a
spare digital pin -- the 5V pin is dead on battery power, so presence =
mains, where the charging voltage would read misleadingly full) or when
the reading is implausible. The manage overlay gains a battery region
(static outline glyph + "NN%", below the manage QR, all menu levels),
and the device POSTs to the new /frame/battery endpoint after a
successful fetch; the server stores percent + as-of timestamp, exposed
via /api/queue and shown in the web UI. FRAME_BATTERY_ADC_GPIO /
FRAME_VBUS_SENSE_GPIO default to -1 (fully inert on the dev board);
compile-verified both disabled and enabled, hardware bring-up deferred
until the ordered XIAO + batteries arrive.
Orientation (server-side only): new config setting + web UI dropdown
(landscape / portrait / landscape_flipped / portrait_flipped). Photos
are composed/cropped at the logical hanging shape (portrait crops at
480x800, so face-aware crops match how the frame actually hangs), then
rotated losslessly into the panel's native 800x480 byte layout after
dithering -- the device never knows. Face-label anchors are transformed
through the same rotation (logical_to_native()) so they stay attached
to faces on rotated frames. Known documented limitation: the on-device
manage overlay still renders in native orientation, so it appears
sideways on a portrait-hung frame (QRs scan at any rotation; text reads
sideways).
Two rounds of follow-up work on the manage-button overlay:
1. Location formatting: US/Canada now show abbreviated state/province
("CA", "ON") instead of the full name, other countries show the full
country name, and each is its own line (was one line, now wraps to
two) so longer international place names have more room without
threatening to overlap the top-right QR box. The bottom-left share QR
also gets a "SCAN TO DOWNLOAD" caption.
2. Escalating menu: pressing the manage button again while its overlay
is already up adds a second level -- each Immich-identified person's
name labeled next to their face in the photo (using Immich's own
face recognition/People data, no detection/recognition added to this
project). A third press exits immediately instead of waiting out the
30s auto-revert timer. No new Immich API needed -- GET /api/faces
already embeds a nullable person.name per face; new
server/app/face_labels.py maps a named face's box into the final
800x480 frame's pixel space (reusing crop-box math extracted from
image_pipeline.py's face-aware cropping). Capped at 4 named faces,
sized to a real firmware RAM budget: each label is its own malloc'd
overlay region on the device, alongside the 4 fixed corner regions
already in use. New GET /frame/face-labels returns a flattened
fixed-slot JSON shape (not a real array) so firmware's existing
flat-scalar parser can read it without needing an actual array
parser. No persistent state needed for the escalation itself -- it's
all local control flow within one continuous awake session
(frame_client.c's run_management_menu()).
tfaour