Adds "Upcoming photos to show" to the config UI (queue_target_len, 5-50,
default 20, replacing the hardcoded QUEUE_TARGET_LEN constant). Lowering
it trims the queue immediately on next page load rather than waiting for
enough advances to consume the excess naturally; raising it tops back up
the same way, via a new photo_queue.sync_queue_length() called from
GET /api/queue.
Replaces the up/down-button vertical list with a responsive photo grid
(native HTML5 drag-and-drop between cards, reusing the existing
POST /api/queue/reorder endpoint -- no new server route needed). Each
card also gets a "Show next" button that jumps it straight to the front
of the queue.
Also bumps the queue lookahead from 10 to 24 photos (QUEUE_TARGET_LEN in
photo_queue.py) now that the grid has room to show more at once.
Factory-reset (GPIO3, hold 10s): clears stored WiFi/server config and
restarts into provisioning -- the deliberate, USB-free replacement for
the earlier reverted RST-based auto-reprovisioning idea.
Next-photo (GPIO2, tap): wakes the device and forces the server to
advance immediately via a new POST /frame/advance, instead of waiting
for the refresh interval. Both buttons arm themselves as deep-sleep GPIO
wakeup sources so a press is noticed promptly even while asleep.
Also makes GET /frame/image side-effect-free: it now only advances once
refresh_interval_s has elapsed since the current photo was set (tracked
server-side), so a device reboot for any reason just redisplays the
current photo instead of silently skipping ahead. The server maintains a
small reorderable upcoming-photos queue, viewable and rearrangeable from
the web UI.
- LICENSE: MIT, with attribution notes for the vendored qrcode/epaper_fonts/
dns_server code and the epd7in3e driver's transcription of Waveshare's
register sequence.
- Top-level README.md: project overview, hardware list, quick-start
pointing at firmware/ and server/, repo layout, license, Claude Code
attribution.
- firmware/README.md: full rewrite (was still the stock ESP-IDF captive
portal example's README) -- build/flash instructions, Kconfig reference
table, first-boot walkthrough, and how to reset to provisioning mode via
NVS erase (the only way in right now; a proper reconfigure trigger is a
future addition).
- docs/hardware.md: wiring table + parts list + strapping-pin/SPI-speed notes.
- docs/architecture.md: sequence diagram and walkthrough of the full
provision -> connect -> fetch -> display -> sleep cycle, plus the
reasoning behind doing image processing server-side and reusing Immich's
face detection instead of bundling a detector.
- server/README.md: fixed stale endpoint docs (missing GET /frame/config,
POST /api/config still describing removed immich_url/api_key fields).
docker-compose.yml is tracked in a repo meant for publishing, so it can't
hold a real API key. Renamed it to docker-compose.yml.example (placeholder
values, safe to commit) and gitignored the real docker-compose.yml --
deploying is now "cp the example, fill in real values, docker compose up",
no .env file needed.
config.load() now reads IMMICH_URL/IMMICH_API_KEY from the environment
and applies them on top of whatever's in config.json, so setting them in
the compose file's environment: block takes effect without ever touching
the web UI. Env vars always win over the UI-saved values when both are
present -- verified they survive a save() with different UI-entered
values still in place.
- pillow==11.1.0 has no prebuilt wheel for Python 3.14, so pip fell back
to building from source and failed without libjpeg dev headers
installed. Bumped to 12.3.0 (has wheels); re-ran the local test suite
against it with no other changes needed.
- The local-dev uvicorn command in the README was missing --host 0.0.0.0,
so it defaulted to 127.0.0.1 -- unreachable from the ESP32 on the LAN.
The Docker image already binds 0.0.0.0 correctly; only the doc'd local
command was wrong.
Builds server/Dockerfile and pushes to this repo's Gitea Container
Registry (git.thumeit.com/tfaour/espresso-frame-server) on every push to
main that touches server/, tagged both latest and the commit SHA.
docker-compose.yml now sets both image: and build: -- deploy hosts can
docker compose pull to grab the CI-built image without needing this
repo's build context, while local dev can still docker compose build
against Dockerfile changes directly.
Implements the server side of the architecture decided on: the ESP32-C6
has no PSRAM and a tight RAM budget, so all the heavy lifting (JPEG
decode, resize, Floyd-Steinberg dithering, 6-color quantization, 4bpp
packing) happens here instead of on-device. The frame just does a single
GET and streams the response straight to SPI.
- GET /frame/image: looks up the current cursor's asset in the configured
Immich album, downloads its preview thumbnail, and returns it packed
into the panel's exact 800x480/4bpp/2px-per-byte format
(application/octet-stream, always exactly 192,000 bytes).
- GET / + POST /api/config + GET /api/albums: a small web UI for entering
the Immich URL/API key and picking an album, rather than cramming that
into the ESP32's captive portal form.
- Config (Immich creds, selected album, cursor) persists to a JSON file
via a docker-compose volume mount.
Verified locally with a venv (Docker isn't available in this environment):
unit-tested image_pipeline against a synthetic image (exact byte count,
valid panel color codes only), and ran a full end-to-end pass against a
mock Immich HTTP server exercising the real /frame/image path.
Pinned dependency versions in requirements.txt after hitting a real bug
with unpinned floors: the latest starlette (1.3.1) resolved by `pip
install fastapi` breaks Jinja2Templates outright.
Not yet wired to the ESP32 side (task 6) or authenticated -- /frame/image
is unauthenticated for now, fine on a trusted LAN but worth revisiting
once the firmware sends a shared device token.
tfaour