RST/power-on trigger: checks esp_reset_reason() at the very top of boot.
ESP32-C6 can't electrically distinguish the RST/EN button from a genuine
power-on (both report ESP_RST_POWERON -- confirmed against ESP-IDF's own
docs, ESP_RST_EXT is explicitly "not applicable"), so POWERON is treated
as "user wants to reconfigure" and routes straight to provisioning. Safe
because the device's only normal restart path is ESP_RST_DEEPSLEEP (its
own scheduled wake), and crash-type resets (brownout/watchdog/panic)
report their own distinct reasons, not POWERON -- so a flaky power supply
or transient crash won't get bounced into provisioning, only an actual
power cycle or RST press will (which plausibly means the frame is being
moved/redeployed anyway).
Auto-fallback: a new NVS-persisted consecutive-failure counter
(frame_config_record_server_failure/reset_server_failures) tracks wakes
where the tools server was unreachable. After
CONFIG_FRAME_REPROVISION_AFTER_FAILURES in a row (default 12, ~1hr at the
retry interval), the device clears its stored WiFi config and
esp_restart()s rather than calling wifi_provisioning_start() directly --
doing that inline would mean initializing the display driver a second
time in the same session (frame_client_run already did once), the same
class of double-init bug hit earlier with WiFi. The next boot's
frame_config_load() naturally reports "not provisioned" and routes
through the existing, already-tested provisioning path with a single
fresh epd_init(). Solves the "I moved the server to a new address" case
without needing USB access.
Both frame_config_save() (fresh provisioning) and any successful server
contact reset the failure counter.
Two bugs found testing against a real (partially-configured) server:
- The reachability check hit HEAD / with -- our server only registers
GET on that route, so it always got a 405. Harmless for the check
itself (any completed HTTP response counts as "reachable"), but noisy
and semantically wrong. Points at GET /health instead, which exists
for exactly this.
- fetch_and_display() failing before any pixel data was sent (e.g. a
400/404 on /frame/image) was treated the same as a mid-stream failure,
which skips drawing a status screen to avoid compounding flashing on
top of an already-refreshed panel. But a pre-stream failure never
touches the panel at all, so skipping the status screen there just
left the old provisioning QR code on screen with no indication
anything had gone wrong. fetch_and_display() now reports whether
streaming ever started so the caller can tell the two cases apart.
- The status screen now always shows on the very first successful
connection after (re)provisioning, regardless of outcome, via a new
"connected_once" NVS flag that frame_config_save() resets on every
fresh provisioning event. Later wakes skip it on success (straight to
the photo) but still show it on any failure, matching the intent from
the original status-screen feature.
Splits provisioning (softAP + captive portal + NVS-backed config) into
wifi_provisioning.c and home-network connection into frame_client.c.
/save_config now parses the form body and persists it to NVS; on boot the
device goes straight to STA mode if a config exists, retrying a few times
before falling back to provisioning if the home network is unreachable.
The provisioning AP is now always named ESPRESSO with a random per-device
password (generated once, persisted in NVS) instead of a fixed Kconfig
value, drawn from a charset that avoids visually ambiguous characters since
it'll be read off the e-ink panel and possibly typed by hand.
tfaour