The frame-claiming pipeline, end to end. Firmware: every request now
carries ?id=<12-hex STA MAC> via build_url (mirrored in build_ota_url),
and the captive portal's success page became a redirect that hands the
user's browser to <server>/claim?device_id=... after ~7s -- enough time
for the phone to drop the provisioning AP while the device reboots.
The server pushes a per-frame device token through /frame/config during
a one-time handshake; the firmware persists it to NVS (a dedicated
single-key write that deliberately doesn't reset the connected-once
flag or WiFi cache) and prefers it over the provisioned shared token
from the next request on. Config response buffer grows 256->512. Both
board variants compile clean; new firmware also works against an old
server (which ignores ?id=) and old firmware against this server (the
phase A legacy mapping), so either deploy order survives.
Server: /claim lands the captive-portal redirect -- claim-gated signup
(a valid unclaimed/unregistered device id IS the enrollment invitation),
pending claims for the user-beats-the-frame race (auto-attached at
self-registration, 24h expiry), and a waiting page that refreshes until
the frame checks in. Unclaimed/unconfigured frames get a rendered
instruction placeholder with a QR from /frame/image (200, never an
error loop) -- new qrcode dep, placeholder shares the exact
quantize/pack path photos use.
The on-frame manage QR now resolves to a limited no-login page: scans
of / carrying device credentials (new ?id&token or the legacy shared
token) 303 to /m/<manage_token>, which allows exactly view queue,
show-next, advance, back, and scoped thumbnails -- no settings, no
removal, no other frames. Full control means logging in.
One real protocol hole found by simulating full wake cycles: after
self-registration the device could never authenticate again (the wake
cycle fetches the image BEFORE /frame/config delivers its token).
require_device now treats the id itself as the credential until the
first authenticated request flips device_token_ack -- the same trust
level as open registration, closing permanently once the handshake
completes.
- version.txt + esp_app_desc_t version reporting (X-Frame-Version header);
new ota_update.c checks the server's advertised version against the
running one and streams+applies an update via esp_https_ota, gated by
bootloader rollback (marks the image valid only after a full successful
cycle, so a bad update can't brick a wall-mounted frame).
- Dual-OTA partition tables: partitions.csv (8MB dev board, 2MB slots) and
new partitions_xiao.csv (4MB XIAO, 1.875MB slots -- the dev board's
table doesn't fit the XIAO's flash). New build_for_board.sh gives each
board its own build dir + generated sdkconfig via SDKCONFIG_DEFAULTS
layering, so switching boards never clobbers the other's config.
- fetch_photo_info()/fetch_face_labels() were using the short
reachability-check timeout even though the manage-menu path can be the
first (cold, TLS-handshake-paying) request of a wake cycle -- switched
to the longer fetch timeout to stop spurious ESP_ERR_HTTP_CONNECT
failures.
- XIAO: the RF switch that selects onboard vs. external antenna
(GPIO3/14) isn't initialized by plain ESP-IDF the way Seeed's Arduino
package does it, leaving WiFi unable to reliably reach the antenna at
all -- new board_antenna.c powers the switch and selects the onboard
antenna, gated behind FRAME_XIAO_ANTENNA_INIT (on by default in
sdkconfig.xiao). Also remaps the EPD DC/RST/BUSY pins, since the dev
board's defaults (GPIO9/10/11) aren't physically exposed on the XIAO.
tfaour