4 Commits

Include renames

Author	SHA1	Message	Date
tfaour	474b92a282	Add server-side support for a second panel (13.3in Spectra 6 / EE02) and scaffold its firmware target ... Server: Frame.panel_type (new column + migration) is auto-derived from the device's reported board (X-Frame-Board), never user-set -- the panel is a property of the hardware, not a picker in the UI. image_pipeline's packing/render pipeline is parameterized by panel geometry instead of hardcoded 800x480 globals, with the real confirmed 13.3in geometry (1600x1200) registered alongside the original 7.3in panel. Existing 7.3in frames are unaffected (column default + board mapping both resolve to the original panel). Board identifiers are also renamed (devkit/xiao -> devkit_esp32c6/ xiao_esp32c6, plus new "ee02") since the EE02 board also carries a XIAO module -- "xiao" alone stopped disambiguating hardware. The server keeps accepting the legacy bare names indefinitely for already-flashed devices. Firmware: scaffolds a third build target (ee02, ESP32-S3 -- a real chip-target change, not just a same-chip Kconfig variant like xiao) and a new epd13in3e driver component skeleton. The actual panel init/LUT/ refresh register sequence isn't ported from vendor demo code yet (none was available), so that component deliberately fails to compile (#error) rather than risk sending unverified register values to real hardware -- devkit/xiao are unaffected and build identically to before. CI's ee02 build step is continue-on-error for the same reason.	2026-08-04 20:08:22 +00:00
tfaour	7ea5c9a4fb	Consolidate firmware UI; server learns board from the device, not a picker ... All firmware-related controls (manual upload, Gitea repo URL, auto-update checkbox, detected board, Update frame button) now live in one "Firmware update" card instead of being split across the main Settings form and a separate card. The board variant used to pick a Gitea release asset was a dropdown the user had to set by hand and could get wrong. The device now reports it itself via a new X-Frame-Board header (CONFIG_FRAME_BOARD_NAME, "devkit" by default, "xiao" in sdkconfig.xiao) on every /frame/config poll, stored as device_board_variant -- the server learns it instead. Update checks/applies are gated on the board being known, since there's nothing to fetch until a device has checked in at least once.	2026-07-21 21:58:59 -04:00
tfaour	ca0ca9d015	Firmware: enable battery ADC reporting by default for the XIAO build ... FRAME_BATTERY_ADC_GPIO was still at its off-by-default -1 in sdkconfig.xiao despite the XIAO being the one board this was designed for -- the status panel showed no battery line because the device never sent a report at all. Sets it to GPIO0, matching the settled shared-with-back-button design.	2026-07-20 22:29:17 -04:00
tfaour	a3ab6c5f13	Firmware: OTA client, dual-board build (devkit/XIAO), version reporting, XIAO fixes ... - version.txt + esp_app_desc_t version reporting (X-Frame-Version header); new ota_update.c checks the server's advertised version against the running one and streams+applies an update via esp_https_ota, gated by bootloader rollback (marks the image valid only after a full successful cycle, so a bad update can't brick a wall-mounted frame). - Dual-OTA partition tables: partitions.csv (8MB dev board, 2MB slots) and new partitions_xiao.csv (4MB XIAO, 1.875MB slots -- the dev board's table doesn't fit the XIAO's flash). New build_for_board.sh gives each board its own build dir + generated sdkconfig via SDKCONFIG_DEFAULTS layering, so switching boards never clobbers the other's config. - fetch_photo_info()/fetch_face_labels() were using the short reachability-check timeout even though the manage-menu path can be the first (cold, TLS-handshake-paying) request of a wake cycle -- switched to the longer fetch timeout to stop spurious ESP_ERR_HTTP_CONNECT failures. - XIAO: the RF switch that selects onboard vs. external antenna (GPIO3/14) isn't initialized by plain ESP-IDF the way Seeed's Arduino package does it, leaving WiFi unable to reliably reach the antenna at all -- new board_antenna.c powers the switch and selects the onboard antenna, gated behind FRAME_XIAO_ANTENNA_INIT (on by default in sdkconfig.xiao). Also remaps the EPD DC/RST/BUSY pins, since the dev board's defaults (GPIO9/10/11) aren't physically exposed on the XIAO.	2026-07-20 22:24:15 -04:00