espresso_frame

81 Commits 2 Branches 13 Tags

3 Commits

Include renames

Author	SHA1	Message	Date
tfaour	7ea5c9a4fb	Consolidate firmware UI; server learns board from the device, not a picker Build and push server image / build-and-push (push) Successful in 37s Details All firmware-related controls (manual upload, Gitea repo URL, auto-update checkbox, detected board, Update frame button) now live in one "Firmware update" card instead of being split across the main Settings form and a separate card. The board variant used to pick a Gitea release asset was a dropdown the user had to set by hand and could get wrong. The device now reports it itself via a new X-Frame-Board header (CONFIG_FRAME_BOARD_NAME, "devkit" by default, "xiao" in sdkconfig.xiao) on every /frame/config poll, stored as device_board_variant -- the server learns it instead. Update checks/applies are gated on the board being known, since there's nothing to fetch until a device has checked in at least once.	2026-07-21 21:58:59 -04:00
tfaour	ca0ca9d015	Firmware: enable battery ADC reporting by default for the XIAO build FRAME_BATTERY_ADC_GPIO was still at its off-by-default -1 in sdkconfig.xiao despite the XIAO being the one board this was designed for -- the status panel showed no battery line because the device never sent a report at all. Sets it to GPIO0, matching the settled shared-with-back-button design.	2026-07-20 22:29:17 -04:00
tfaour	a3ab6c5f13	Firmware: OTA client, dual-board build (devkit/XIAO), version reporting, XIAO fixes Build and push server image / build-and-push (push) Successful in 36s Details - version.txt + esp_app_desc_t version reporting (X-Frame-Version header); new ota_update.c checks the server's advertised version against the running one and streams+applies an update via esp_https_ota, gated by bootloader rollback (marks the image valid only after a full successful cycle, so a bad update can't brick a wall-mounted frame). - Dual-OTA partition tables: partitions.csv (8MB dev board, 2MB slots) and new partitions_xiao.csv (4MB XIAO, 1.875MB slots -- the dev board's table doesn't fit the XIAO's flash). New build_for_board.sh gives each board its own build dir + generated sdkconfig via SDKCONFIG_DEFAULTS layering, so switching boards never clobbers the other's config. - fetch_photo_info()/fetch_face_labels() were using the short reachability-check timeout even though the manage-menu path can be the first (cold, TLS-handshake-paying) request of a wake cycle -- switched to the longer fetch timeout to stop spurious ESP_ERR_HTTP_CONNECT failures. - XIAO: the RF switch that selects onboard vs. external antenna (GPIO3/14) isn't initialized by plain ESP-IDF the way Seeed's Arduino package does it, leaving WiFi unable to reliably reach the antenna at all -- new board_antenna.c powers the switch and selects the onboard antenna, gated behind FRAME_XIAO_ANTENNA_INIT (on by default in sdkconfig.xiao). Also remaps the EPD DC/RST/BUSY pins, since the dev board's defaults (GPIO9/10/11) aren't physically exposed on the XIAO.	2026-07-20 22:24:15 -04:00

Author

SHA1

Message

Date

tfaour

7ea5c9a4fb

Consolidate firmware UI; server learns board from the device, not a picker

Build and push server image / build-and-push (push) Successful in 37s

Details

All firmware-related controls (manual upload, Gitea repo URL,
auto-update checkbox, detected board, Update frame button) now live in
one "Firmware update" card instead of being split across the main
Settings form and a separate card.

The board variant used to pick a Gitea release asset was a dropdown
the user had to set by hand and could get wrong. The device now
reports it itself via a new X-Frame-Board header (CONFIG_FRAME_BOARD_NAME,
"devkit" by default, "xiao" in sdkconfig.xiao) on every /frame/config
poll, stored as device_board_variant -- the server learns it instead.
Update checks/applies are gated on the board being known, since there's
nothing to fetch until a device has checked in at least once.

2026-07-21 21:58:59 -04:00

tfaour

ca0ca9d015

Firmware: enable battery ADC reporting by default for the XIAO build

FRAME_BATTERY_ADC_GPIO was still at its off-by-default -1 in
sdkconfig.xiao despite the XIAO being the one board this was designed
for -- the status panel showed no battery line because the device never
sent a report at all. Sets it to GPIO0, matching the settled
shared-with-back-button design.

2026-07-20 22:29:17 -04:00

tfaour

a3ab6c5f13

Firmware: OTA client, dual-board build (devkit/XIAO), version reporting, XIAO fixes

Build and push server image / build-and-push (push) Successful in 36s

Details

- version.txt + esp_app_desc_t version reporting (X-Frame-Version header);
  new ota_update.c checks the server's advertised version against the
  running one and streams+applies an update via esp_https_ota, gated by
  bootloader rollback (marks the image valid only after a full successful
  cycle, so a bad update can't brick a wall-mounted frame).
- Dual-OTA partition tables: partitions.csv (8MB dev board, 2MB slots) and
  new partitions_xiao.csv (4MB XIAO, 1.875MB slots -- the dev board's
  table doesn't fit the XIAO's flash). New build_for_board.sh gives each
  board its own build dir + generated sdkconfig via SDKCONFIG_DEFAULTS
  layering, so switching boards never clobbers the other's config.
- fetch_photo_info()/fetch_face_labels() were using the short
  reachability-check timeout even though the manage-menu path can be the
  first (cold, TLS-handshake-paying) request of a wake cycle -- switched
  to the longer fetch timeout to stop spurious ESP_ERR_HTTP_CONNECT
  failures.
- XIAO: the RF switch that selects onboard vs. external antenna
  (GPIO3/14) isn't initialized by plain ESP-IDF the way Seeed's Arduino
  package does it, leaving WiFi unable to reliably reach the antenna at
  all -- new board_antenna.c powers the switch and selects the onboard
  antenna, gated behind FRAME_XIAO_ANTENNA_INIT (on by default in
  sdkconfig.xiao). Also remaps the EPD DC/RST/BUSY pins, since the dev
  board's defaults (GPIO9/10/11) aren't physically exposed on the XIAO.

2026-07-20 22:24:15 -04:00