Server: migration 41 drops the pre-widget-system Frame columns
(mode/album_id/current_asset_id/queue/calendar_*/whiteboard_*, etc)
docs/widgets.md flagged as the deliberately-deferred Phase 6 cleanup,
with a raw-SQL backfill safety net for any frame that still somehow
lacks a Widget. Also drops legacy_token_enabled and the shared
MANAGEMENT_TOKEN fallback it gated in require_device/require_browser --
the per-frame manage_token/device_token flow (and the /m/ page) fully
supersede it now; MANAGEMENT_TOKEN's only remaining role is the
optional pre-setup claim gate. Confirmed with the maintainer that the
deployed frame is already off the shared token before removing the
server-side fallback.
Firmware: the captive portal's "Access Token" field and its NVS/
build_url plumbing only ever mattered for pointing new firmware at an
old pre-multi-frame server -- gone along with the server-side fallback
it fed. Version bump to publish the change.
Quick reset is now the fast/default action; summoning the management
menu takes a deliberate hold. Factory reset at ~15s is unchanged.
Renamed FRAME_COMBO_SOFT_RESET_HOLD_MS -> FRAME_COMBO_MENU_HOLD_MS to
match its new meaning. Bumps firmware to 1.4.1.
Release build for the per-widget button actions + hold-for-global-
action firmware changes (short/long press detection on next/back,
POST /frame/global-next|back). CI's firmware-build-check.yml already
confirmed both board variants compile clean at this commit.
After a successful home-WiFi connection, caches BSSID/channel and
IP/netmask/gateway/DNS in NVS. The next wake's first connect attempt
uses the cached BSSID/channel (skips the all-channel scan) and applies
the cached IP directly once the link comes up (skips DHCP) -- a couple
fewer seconds of radio-on time per wake, free every wake since nothing
about the network actually needs renegotiating most of the time.
Falls back to a normal scan+DHCP attempt, and clears the cache, if: the
fast attempt itself fails, or it "succeeds" at the WiFi layer but the
full fetch cycle then fails anyway (a stale cached IP/DNS/gateway that
associates but can't actually reach the server). Also cleared on
(re)provisioning and factory reset, since a new network shouldn't try
to reuse the old one's cache.
The static-IP path needed care to get right without touching untested
territory: esp_netif_set_ip_info() only posts IP_EVENT_STA_GOT_IP (what
the existing connect-wait logic blocks on) once the netif is already
up, which the internal netif-glue's own WIFI_EVENT_STA_CONNECTED
handler guarantees by running first (registered earlier, in
esp_netif_create_default_wifi_sta()) -- confirmed against ESP-IDF's own
static_ip example and esp_netif_handlers.c source rather than assumed.
Falling back after a failed fast attempt also needed an explicit
esp_netif_dhcpc_start() first: esp_netif_dhcpc_stop() leaves the netif's
DHCP status STOPPED rather than resetting to INIT, and left alone the
glue would silently re-post the stale cached IP on the next connect
instead of actually running DHCP (esp_netif_action_connected).
Version bumped to 1.1.0 (real feature, not just a fix); build-verified
clean on both board configs (devkit 8MB, XIAO 4MB), no new warnings.
- version.txt + esp_app_desc_t version reporting (X-Frame-Version header);
new ota_update.c checks the server's advertised version against the
running one and streams+applies an update via esp_https_ota, gated by
bootloader rollback (marks the image valid only after a full successful
cycle, so a bad update can't brick a wall-mounted frame).
- Dual-OTA partition tables: partitions.csv (8MB dev board, 2MB slots) and
new partitions_xiao.csv (4MB XIAO, 1.875MB slots -- the dev board's
table doesn't fit the XIAO's flash). New build_for_board.sh gives each
board its own build dir + generated sdkconfig via SDKCONFIG_DEFAULTS
layering, so switching boards never clobbers the other's config.
- fetch_photo_info()/fetch_face_labels() were using the short
reachability-check timeout even though the manage-menu path can be the
first (cold, TLS-handshake-paying) request of a wake cycle -- switched
to the longer fetch timeout to stop spurious ESP_ERR_HTTP_CONNECT
failures.
- XIAO: the RF switch that selects onboard vs. external antenna
(GPIO3/14) isn't initialized by plain ESP-IDF the way Seeed's Arduino
package does it, leaving WiFi unable to reliably reach the antenna at
all -- new board_antenna.c powers the switch and selects the onboard
antenna, gated behind FRAME_XIAO_ANTENNA_INIT (on by default in
sdkconfig.xiao). Also remaps the EPD DC/RST/BUSY pins, since the dev
board's defaults (GPIO9/10/11) aren't physically exposed on the XIAO.
tfaour