#pragma once

#include <stdbool.h>
#include <stddef.h>
#include "esp_err.h"

#define FRAME_CFG_SSID_MAX_LEN 32
#define FRAME_CFG_PASSWORD_MAX_LEN 64
#define FRAME_CFG_SERVER_MAX_LEN 128
#define FRAME_AP_PASSWORD_LEN 10

typedef struct {
    char sta_ssid[FRAME_CFG_SSID_MAX_LEN + 1];
    char sta_password[FRAME_CFG_PASSWORD_MAX_LEN + 1];
    char toolsserver[FRAME_CFG_SERVER_MAX_LEN + 1];
} frame_config_t;

/**
 * Loads the saved home-network config from NVS.
 * Returns ESP_ERR_NVS_NOT_FOUND if the device has never been provisioned.
 */
esp_err_t frame_config_load(frame_config_t *out);

/** Saves the home-network config to NVS. Resets the "connected once"
 * flag below, since this is a fresh (re)provisioning event. */
esp_err_t frame_config_save(const frame_config_t *cfg);

/**
 * Whether the device has already shown the post-connect status screen at
 * least once since the current WiFi config was saved. Used so the status
 * screen always shows on the first connection after (re)provisioning, but
 * is skipped on later successful wakes to save an extra refresh.
 */
bool frame_config_has_connected_once(void);

/** Marks the status screen as having been shown for the current WiFi config. */
void frame_config_mark_connected_once(void);

/**
 * Returns this device's provisioning AP identity: a fixed SSID (from
 * Kconfig) and a password that's generated once on first use and persisted
 * in NVS from then on. The password is drawn from an easy-to-type charset
 * since it's shown on the e-ink panel (as both a QR code and plaintext) and
 * may need to be typed in by hand.
 */
void ap_identity_get(char *ssid_out, size_t ssid_len, char *pass_out, size_t pass_len);

/**
 * Brings up the ESPRESSO softAP + captive portal (DNS + HTTP) so the user
 * can provision the device. Does not return.
 */
void wifi_provisioning_start(void);