#include "driver/gpio.h"
#include "esp_log.h"
#include "esp_sleep.h"

#include "freertos/FreeRTOS.h"
#include "freertos/task.h"

#include "manage_button.h"

static const char *TAG = "manage_button";

#if CONFIG_FRAME_MANAGE_BUTTON_GPIO >= 0

#define MANAGE_BUTTON_GPIO ((gpio_num_t)CONFIG_FRAME_MANAGE_BUTTON_GPIO)
#define MANAGE_BUTTON_DEBOUNCE_MS 20
#define MANAGE_BUTTON_DEBOUNCE_CHECKS 3

void manage_button_init(void)
{
    gpio_config_t io_conf = {
        .pin_bit_mask = 1ULL << MANAGE_BUTTON_GPIO,
        .mode = GPIO_MODE_INPUT,
        .pull_up_en = GPIO_PULLUP_ENABLE,
    };
    gpio_config(&io_conf);

    /* See reset_button.c for why this API (not ext1) -- it manages the
     * pull resistor across the sleep transition itself, so the pin
     * doesn't float and wake the device spuriously. */
    esp_sleep_enable_gpio_wakeup_on_hp_periph_powerdown(1ULL << MANAGE_BUTTON_GPIO, ESP_GPIO_WAKEUP_GPIO_LOW);
}

bool manage_button_check(void)
{
    /* See next_button.c for why the latched wakeup status is checked
     * first: a quick tap can release before a live gpio_get_level() call
     * this far into boot would still see it held, even though it's what
     * woke the device. */
    if (esp_sleep_get_gpio_wakeup_status() & (1ULL << MANAGE_BUTTON_GPIO)) {
        ESP_LOGI(TAG, "Manage button caused this wake, showing management QR");
        return true;
    }

    if (gpio_get_level(MANAGE_BUTTON_GPIO) != 0) {
        return false;
    }

    for (int i = 0; i < MANAGE_BUTTON_DEBOUNCE_CHECKS; i++) {
        vTaskDelay(pdMS_TO_TICKS(MANAGE_BUTTON_DEBOUNCE_MS));
        if (gpio_get_level(MANAGE_BUTTON_GPIO) != 0) {
            return false; /* noise, not a real press */
        }
    }

    ESP_LOGI(TAG, "Manage button held during power-on, showing management QR");
    return true;
}

#else

void manage_button_init(void) {}
bool manage_button_check(void) { return false; }

#endif