tfaour
474b92a282
Server: Frame.panel_type (new column + migration) is auto-derived from the device's reported board (X-Frame-Board), never user-set -- the panel is a property of the hardware, not a picker in the UI. image_pipeline's packing/render pipeline is parameterized by panel geometry instead of hardcoded 800x480 globals, with the real confirmed 13.3in geometry (1600x1200) registered alongside the original 7.3in panel. Existing 7.3in frames are unaffected (column default + board mapping both resolve to the original panel). Board identifiers are also renamed (devkit/xiao -> devkit_esp32c6/ xiao_esp32c6, plus new "ee02") since the EE02 board also carries a XIAO module -- "xiao" alone stopped disambiguating hardware. The server keeps accepting the legacy bare names indefinitely for already-flashed devices. Firmware: scaffolds a third build target (ee02, ESP32-S3 -- a real chip-target change, not just a same-chip Kconfig variant like xiao) and a new epd13in3e driver component skeleton. The actual panel init/LUT/ refresh register sequence isn't ported from vendor demo code yet (none was available), so that component deliberately fails to compile (#error) rather than risk sending unverified register values to real hardware -- devkit/xiao are unaffected and build identically to before. CI's ee02 build step is continue-on-error for the same reason.
77 lines
3.3 KiB
YAML
77 lines
3.3 KiB
YAML
name: Firmware build check
|
|
|
|
# Fires on every push touching firmware source, unlike
|
|
# firmware-release-build.yml (which only builds+publishes when
|
|
# firmware/version.txt itself is bumped -- the "cut a release" signal).
|
|
# This just verifies every board variant still compiles (or, for ee02,
|
|
# that everything up to its known/tracked #error still compiles --
|
|
# see that step's own comment); nothing else in CI catches a
|
|
# firmware/** push that breaks the build until someone happens to bump
|
|
# the version next.
|
|
on:
|
|
push:
|
|
branches: [main]
|
|
paths:
|
|
- "firmware/**"
|
|
- ".gitea/workflows/firmware-build-check.yml"
|
|
|
|
jobs:
|
|
build-check:
|
|
runs-on: ubuntu-latest
|
|
steps:
|
|
- name: Checkout
|
|
uses: actions/checkout@v4
|
|
|
|
# Same docker create/cp/start pattern as firmware-release-build.yml
|
|
# (see that file's own comment for why -- the runner's job
|
|
# workspace lives in a named Docker volume, not a real host path,
|
|
# so a nested `docker run -v "$PWD:..."` bind-mounts nothing
|
|
# useful). No release/artifact step here -- this only needs to
|
|
# prove `idf.py build` still succeeds for each board.
|
|
- name: Build (devkit -- ESP32-C6-DevKitC-1)
|
|
run: |
|
|
cid=$(docker create -w /workspace/firmware espressif/idf:release-v6.0 bash -c '
|
|
git config --global --add safe.directory /workspace &&
|
|
. "$IDF_PATH/export.sh" &&
|
|
./build_for_board.sh devkit set-target esp32c6 &&
|
|
./build_for_board.sh devkit build
|
|
')
|
|
docker cp "$PWD/." "$cid:/workspace"
|
|
docker start -a "$cid"
|
|
docker rm "$cid"
|
|
|
|
- name: Build (xiao -- Seeed XIAO ESP32-C6)
|
|
run: |
|
|
cid=$(docker create -w /workspace/firmware espressif/idf:release-v6.0 bash -c '
|
|
git config --global --add safe.directory /workspace &&
|
|
. "$IDF_PATH/export.sh" &&
|
|
./build_for_board.sh xiao set-target esp32c6 &&
|
|
./build_for_board.sh xiao build
|
|
')
|
|
docker cp "$PWD/." "$cid:/workspace"
|
|
docker start -a "$cid"
|
|
docker rm "$cid"
|
|
|
|
# Expected to fail until firmware/components/epd13in3e's panel
|
|
# driver is ported from vendor demo code (deliberate #error, see
|
|
# that file's own top comment) -- continue-on-error so this known
|
|
# gap doesn't block every other firmware/** push. Still worth
|
|
# running: catches a regression in the surrounding scaffolding
|
|
# (Kconfig, main/CMakeLists.txt's component selection, sdkconfig
|
|
# layering) up to the point of that #error, same value a build
|
|
# check normally provides. Remove continue-on-error once
|
|
# epd13in3e's driver is real, so a build failure here goes back to
|
|
# being a genuine regression signal.
|
|
- name: Build (ee02 -- Seeed EE02, XIAO ESP32-S3 Plus + 13.3in panel)
|
|
continue-on-error: true
|
|
run: |
|
|
cid=$(docker create -w /workspace/firmware espressif/idf:release-v6.0 bash -c '
|
|
git config --global --add safe.directory /workspace &&
|
|
. "$IDF_PATH/export.sh" &&
|
|
./build_for_board.sh ee02 set-target esp32s3 &&
|
|
./build_for_board.sh ee02 build
|
|
')
|
|
docker cp "$PWD/." "$cid:/workspace"
|
|
docker start -a "$cid"
|
|
docker rm "$cid"
|