Files
tfaour a3ab6c5f13
Build and push server image / build-and-push (push) Successful in 36s
Firmware: OTA client, dual-board build (devkit/XIAO), version reporting, XIAO fixes
- version.txt + esp_app_desc_t version reporting (X-Frame-Version header);
  new ota_update.c checks the server's advertised version against the
  running one and streams+applies an update via esp_https_ota, gated by
  bootloader rollback (marks the image valid only after a full successful
  cycle, so a bad update can't brick a wall-mounted frame).
- Dual-OTA partition tables: partitions.csv (8MB dev board, 2MB slots) and
  new partitions_xiao.csv (4MB XIAO, 1.875MB slots -- the dev board's
  table doesn't fit the XIAO's flash). New build_for_board.sh gives each
  board its own build dir + generated sdkconfig via SDKCONFIG_DEFAULTS
  layering, so switching boards never clobbers the other's config.
- fetch_photo_info()/fetch_face_labels() were using the short
  reachability-check timeout even though the manage-menu path can be the
  first (cold, TLS-handshake-paying) request of a wake cycle -- switched
  to the longer fetch timeout to stop spurious ESP_ERR_HTTP_CONNECT
  failures.
- XIAO: the RF switch that selects onboard vs. external antenna
  (GPIO3/14) isn't initialized by plain ESP-IDF the way Seeed's Arduino
  package does it, leaving WiFi unable to reliably reach the antenna at
  all -- new board_antenna.c powers the switch and selects the onboard
  antenna, gated behind FRAME_XIAO_ANTENNA_INIT (on by default in
  sdkconfig.xiao). Also remaps the EPD DC/RST/BUSY pins, since the dev
  board's defaults (GPIO9/10/11) aren't physically exposed on the XIAO.
2026-07-20 22:24:15 -04:00

688 B

1# Name, Type, SubType, Offset, Size, Flags
2# nvs/phy_init/ota_0 keep the exact offsets of the pre-OTA layout (nvs
3# slot in place), so migrating an existing device to this table via a
4# one-time USB `idf.py flash` preserves its provisioning/NVS state.
5# otadata/ota_1 land in previously-unused flash. App slots must be 64KB
6# (0x10000) aligned, hence ota_1 at 0x220000 rather than 0x212000.
7nvs, data, nvs, 0x9000, 0x6000,
8phy_init, data, phy, 0xf000, 0x1000,
9ota_0, app, ota_0, 0x10000, 0x200000,
10otadata, data, ota, 0x210000, 0x2000,
11ota_1, app, ota_1, 0x220000, 0x200000,