tfaour
a3ab6c5f13
Build and push server image / build-and-push (push) Successful in 36s
- version.txt + esp_app_desc_t version reporting (X-Frame-Version header); new ota_update.c checks the server's advertised version against the running one and streams+applies an update via esp_https_ota, gated by bootloader rollback (marks the image valid only after a full successful cycle, so a bad update can't brick a wall-mounted frame). - Dual-OTA partition tables: partitions.csv (8MB dev board, 2MB slots) and new partitions_xiao.csv (4MB XIAO, 1.875MB slots -- the dev board's table doesn't fit the XIAO's flash). New build_for_board.sh gives each board its own build dir + generated sdkconfig via SDKCONFIG_DEFAULTS layering, so switching boards never clobbers the other's config. - fetch_photo_info()/fetch_face_labels() were using the short reachability-check timeout even though the manage-menu path can be the first (cold, TLS-handshake-paying) request of a wake cycle -- switched to the longer fetch timeout to stop spurious ESP_ERR_HTTP_CONNECT failures. - XIAO: the RF switch that selects onboard vs. external antenna (GPIO3/14) isn't initialized by plain ESP-IDF the way Seeed's Arduino package does it, leaving WiFi unable to reliably reach the antenna at all -- new board_antenna.c powers the switch and selects the onboard antenna, gated behind FRAME_XIAO_ANTENNA_INIT (on by default in sdkconfig.xiao). Also remaps the EPD DC/RST/BUSY pins, since the dev board's defaults (GPIO9/10/11) aren't physically exposed on the XIAO.
13 lines
688 B
CSV
13 lines
688 B
CSV
# Name, Type, SubType, Offset, Size, Flags
|
|
# nvs/phy_init/ota_0 keep the exact offsets of the pre-OTA layout (nvs
|
|
# 0x9000, phy 0xf000, app 0x10000 -- ota_0 replaces the old "factory"
|
|
# slot in place), so migrating an existing device to this table via a
|
|
# one-time USB `idf.py flash` preserves its provisioning/NVS state.
|
|
# otadata/ota_1 land in previously-unused flash. App slots must be 64KB
|
|
# (0x10000) aligned, hence ota_1 at 0x220000 rather than 0x212000.
|
|
nvs, data, nvs, 0x9000, 0x6000,
|
|
phy_init, data, phy, 0xf000, 0x1000,
|
|
ota_0, app, ota_0, 0x10000, 0x200000,
|
|
otadata, data, ota, 0x210000, 0x2000,
|
|
ota_1, app, ota_1, 0x220000, 0x200000,
|