tfaour
7013311249
Build and push server image / build-and-push (push) Successful in 32s
- LICENSE: MIT, with attribution notes for the vendored qrcode/epaper_fonts/ dns_server code and the epd7in3e driver's transcription of Waveshare's register sequence. - Top-level README.md: project overview, hardware list, quick-start pointing at firmware/ and server/, repo layout, license, Claude Code attribution. - firmware/README.md: full rewrite (was still the stock ESP-IDF captive portal example's README) -- build/flash instructions, Kconfig reference table, first-boot walkthrough, and how to reset to provisioning mode via NVS erase (the only way in right now; a proper reconfigure trigger is a future addition). - docs/hardware.md: wiring table + parts list + strapping-pin/SPI-speed notes. - docs/architecture.md: sequence diagram and walkthrough of the full provision -> connect -> fetch -> display -> sleep cycle, plus the reasoning behind doing image processing server-side and reusing Immich's face detection instead of bundling a detector. - server/README.md: fixed stale endpoint docs (missing GET /frame/config, POST /api/config still describing removed immich_url/api_key fields).
88 lines
3.6 KiB
Markdown
88 lines
3.6 KiB
Markdown
# ESPresso Frame Server
|
|
|
|
Pulls photos from an [Immich](https://immich.app) album, resizes/dithers/quantizes
|
|
them to the E Ink Spectra 6 panel's exact 6-color format, and serves the
|
|
frame a ready-to-display image once an hour. All the image processing
|
|
happens here so the ESP32 never has to decode a JPEG or run a dithering
|
|
algorithm itself -- it just streams the response straight to the panel.
|
|
|
|
## Setup
|
|
|
|
1. **Get an Immich API key**: in Immich, go to Account Settings -> API Keys
|
|
-> New API Key. Read-only access to albums/assets is enough.
|
|
2. **Copy the compose file and fill in your Immich details**:
|
|
```
|
|
cp docker-compose.yml.example docker-compose.yml
|
|
```
|
|
Edit `docker-compose.yml` and set `IMMICH_URL`/`IMMICH_API_KEY` under
|
|
`environment:`. `docker-compose.yml` is gitignored (it'll hold your real
|
|
API key) -- `docker-compose.yml.example` is the one that's committed.
|
|
3. **Run the server**:
|
|
```
|
|
docker compose up -d
|
|
```
|
|
4. Open `http://<this-machine>:8420/` in a browser, click **Load Albums**,
|
|
pick one, and **Save**. (The Immich URL/API key fields will already be
|
|
populated from the environment; changing them in the UI has no effect
|
|
as long as the env vars are set -- they win on every load.)
|
|
5. On the ESP32's captive portal setup form, set the **Tools Server** field
|
|
to `<this-machine>:8420`.
|
|
|
|
## Endpoints
|
|
|
|
- `GET /` -- config UI (album, order, refresh interval, face-aware crop
|
|
toggle -- not Immich URL/API key, see Setup above)
|
|
- `GET /api/albums` -- lists Immich albums (used by the config UI)
|
|
- `POST /api/config` -- saves album/order/refresh_interval_s/smart_crop_faces
|
|
- `GET /frame/image` -- returns the current photo pre-processed into the
|
|
panel's raw 800x480, 4-bit-per-pixel, 2-pixels-per-byte format
|
|
(`application/octet-stream`, exactly 192,000 bytes)
|
|
- `GET /frame/config` -- `{"refresh_interval_s": ...}`, polled by the frame
|
|
each wake alongside its reachability check
|
|
- `GET /health` -- liveness check
|
|
|
|
## Notes
|
|
|
|
- Album/order/refresh-interval/etc. are stored in `./data/config.json` on
|
|
the host via the compose volume mount. Immich URL/API key are too if set
|
|
via the web UI, but `IMMICH_URL`/`IMMICH_API_KEY` env vars (see Setup
|
|
above) always take precedence when present.
|
|
- `/frame/image` isn't authenticated yet. That's fine on a trusted home
|
|
LAN for now, but worth revisiting once the ESP32 side is wired up to
|
|
send a shared device token.
|
|
- The 6-color palette RGB values in `app/image_pipeline.py` are
|
|
approximations, not measured values (Waveshare doesn't publish exact
|
|
color primaries for this panel) -- tune them once you can compare a
|
|
rendered test image against the real panel.
|
|
|
|
## Deploying a pre-built image
|
|
|
|
Every push to `main` that touches `server/` triggers a Gitea Actions
|
|
workflow (`.gitea/workflows/server-docker-build.yml`) that builds this
|
|
image and pushes it to this repo's Gitea Container Registry at
|
|
`git.thumeit.com/tfaour/espresso-frame-server`. `docker-compose.yml`
|
|
(copied from `docker-compose.yml.example`, see Setup above) already
|
|
points at that image, so a deploy host doesn't need this repo's build
|
|
context at all -- just the compose file:
|
|
|
|
```
|
|
docker compose pull
|
|
docker compose up -d
|
|
```
|
|
|
|
`docker compose build` (or `up --build`) still works too, for local
|
|
iteration against your own Dockerfile changes.
|
|
|
|
## Local development (without Docker)
|
|
|
|
```
|
|
python3 -m venv .venv
|
|
source .venv/bin/activate
|
|
pip install -r requirements.txt
|
|
CONFIG_PATH=./data/config.json uvicorn app.main:app --reload --host 0.0.0.0 --port 8420
|
|
```
|
|
|
|
`--host 0.0.0.0` matters here: without it, uvicorn defaults to
|
|
`127.0.0.1` (localhost-only), which the ESP32 can't reach over the LAN.
|
|
The Docker image already binds `0.0.0.0` by default.
|