tfaour
a358045cea
Build and push server image / build-and-push (push) Successful in 32s
Two changes, bundled since they landed in the same session and touch
overlapping files:
1. Fix: "Show next" sent the browser's full queue snapshot to
POST /api/queue/reorder, which hard-rejected if the server's queue
had shifted since the last fetch (e.g. right after a queue-length
trim). New POST /api/queue/promote moves one photo to the front
authoritatively, with no dependency on client staleness. /reorder
itself is now tolerant too -- unrecognized IDs are dropped and
missing ones appended, instead of rejecting the whole request.
2. Feature: the manage button's overlay now also shows the photo's
location (top-left, only if Immich reverse-geocoded it from GPS
EXIF), the date it was taken (bottom-right), and a QR code (bottom-
left) linking to a 30-minute public Immich share link -- created
lazily when someone actually scans it, not when the button's
pressed. New server endpoints GET /frame/photo-info and
GET /frame/share/{asset_id} (scoped to the frame's current/queued
photos, not any arbitrary Immich asset). Firmware-side, the overlay
mechanism generalizes from one spliced region to up to four
(manage_qr_overlay.c), each its own small buffer, still never
holding the full frame in RAM.
ESPresso Frame
A DIY e-ink photo frame: an ESP32-C6 pulls photos from your Immich library and displays them on a 7.3" full-color e-paper panel, waking on a timer to refresh and spending the rest of its time in deep sleep.
- No cables to a computer, no SD card shuffling. Provisioning is a captive portal with a QR code drawn on the panel itself -- scan, join, fill in your WiFi and server address, done.
- The frame never decodes an image. A small self-hosted server does all the work (pulling from Immich, cropping, dithering, packing into the panel's exact pixel format) and hands the device a stream it can write straight to SPI. The ESP32-C6 has no PSRAM and not much SRAM to spare -- keeping it a dumb display client is what makes that workable.
- Crops toward faces, not just the center, using face bounding boxes Immich already computed for its own People feature -- no bundled face detector.
- Refresh interval and album are configurable from a web UI, no reflashing needed to change them.
Hardware
- ESP32-C6 dev board (8MB flash)
- Waveshare 7.3" E Ink Spectra 6 (E6) panel -- 800x480, 6-color, SPI
See docs/hardware.md for wiring and
docs/architecture.md for how the two halves talk
to each other.
Getting started
server/-- run the FastAPI server first (Docker Compose, points at your Immich instance). Seeserver/README.md.firmware/-- build and flash the ESP32-C6, then scan the QR codes it draws on first boot to provision it. Seefirmware/README.md.
Repo layout
firmware/ ESP-IDF project for the ESP32-C6
server/ FastAPI server: Immich -> crop/dither/pack -> the frame
docs/ Wiring and architecture notes
License
MIT -- see LICENSE. A few small pieces of vendored
third-party code (a QR code generator, a bitmap font table) keep their
own permissive licenses; see LICENSE for details.
Built with substantial assistance from Claude Code.