tfaour
c1c803b497
Build and push server image / build-and-push (push) Successful in 38s
Two real fixes to app/mail.py, both found by testing against an actual
mail server rather than just a fake stub:
- Replaces the STARTTLS-only smtp_use_tls boolean with a three-way
smtp_encryption ("none"/"starttls"/"ssl"). Implicit TLS (port 465,
what Purelymail and most providers offer alongside 587/STARTTLS) is a
different handshake entirely -- TLS from the first byte, not a
plaintext connection that gets upgraded -- so it needs its own
smtplib.SMTP_SSL code path, not just a skipped starttls() call.
Schema migration v3 adds the column, backfills it from the old
boolean, and drops the boolean (safe on a live, populated DB).
- Outgoing mail was missing Date and Message-ID headers -- email.mime
doesn't set either automatically, and a missing Message-ID in
particular is enough for a strict content filter (confirmed via a
real Postfix+Amavis mail server's logs: SPF/DKIM/DMARC all passed
cleanly, but Amavis quarantined the message as "BAD-HEADER-0" purely
for the missing id) to silently swallow an otherwise-legitimate
email, even though smtplib reports success -- the send genuinely
succeeds to the relay, it just never survives the recipient's own
filtering. Both headers are now set, with the Message-ID's domain
matching the From address.
Verified: SMTP_SSL path against a hand-rolled implicit-TLS fake server
(self-signed cert, client-side verification relaxed only in the test
harness -- production code keeps ssl.create_default_context()'s real
verification), the v2->v3 migration against live data, the full admin
SMTP-save + test-email round trip over HTTP, and the standing legacy-
device curl suite.
ESPresso Frame
A DIY e-ink photo frame: an ESP32-C6 pulls photos from your Immich library and displays them on a 7.3" full-color e-paper panel, waking on a timer to refresh and spending the rest of its time in deep sleep.
- No cables to a computer, no SD card shuffling. Provisioning is a captive portal with a QR code drawn on the panel itself -- scan, join, fill in your WiFi and server address, done.
- The frame never decodes an image. A small self-hosted server does all the work (pulling from Immich, cropping, dithering, packing into the panel's exact pixel format) and hands the device a stream it can write straight to SPI. The ESP32-C6 has no PSRAM and not much SRAM to spare -- keeping it a dumb display client is what makes that workable.
- Crops toward faces, not just the center, using face bounding boxes Immich already computed for its own People feature -- no bundled face detector.
- Refresh interval and album are configurable from a web UI, no reflashing needed to change them.
Hardware
- ESP32-C6 dev board (8MB flash)
- Waveshare 7.3" E Ink Spectra 6 (E6) panel -- 800x480, 6-color, SPI
See docs/hardware.md for wiring and
docs/architecture.md for how the two halves talk
to each other.
Getting started
server/-- run the FastAPI server first (Docker Compose, points at your Immich instance). Seeserver/README.md.firmware/-- build and flash the ESP32-C6, then scan the QR codes it draws on first boot to provision it. Seefirmware/README.md.
Repo layout
firmware/ ESP-IDF project for the ESP32-C6
server/ FastAPI server: Immich -> crop/dither/pack -> the frame
docs/ Wiring and architecture notes
License
MIT -- see LICENSE. A few small pieces of vendored
third-party code (a QR code generator, a bitmap font table) keep their
own permissive licenses; see LICENSE for details.
Built with substantial assistance from Claude Code.