tfaour
f74085cedf
Pressing the manage button (GPIO1) overlays a small QR code -- "SCAN TO MANAGE" -- in the top-right corner of whatever photo is currently on screen, linking to the server's config page, then reverts to the plain photo after 30 seconds. The overlay is spliced into the existing streaming fetch as chunks pass through (frame_client.c's http_read_fn), rather than buffering the full 192,000-byte frame in RAM: only the small overlay rectangle itself (~30KB) is ever held in memory, generated via new stride-parameterized drawing helpers (epd_draw_*_ex in epd_draw.c) that let the existing QR/text drawing code target an arbitrarily-sized buffer instead of a full-frame one. epd7in3e.c is untouched -- it has no idea an overlay exists.
ESPresso Frame
A DIY e-ink photo frame: an ESP32-C6 pulls photos from your Immich library and displays them on a 7.3" full-color e-paper panel, waking on a timer to refresh and spending the rest of its time in deep sleep.
- No cables to a computer, no SD card shuffling. Provisioning is a captive portal with a QR code drawn on the panel itself -- scan, join, fill in your WiFi and server address, done.
- The frame never decodes an image. A small self-hosted server does all the work (pulling from Immich, cropping, dithering, packing into the panel's exact pixel format) and hands the device a stream it can write straight to SPI. The ESP32-C6 has no PSRAM and not much SRAM to spare -- keeping it a dumb display client is what makes that workable.
- Crops toward faces, not just the center, using face bounding boxes Immich already computed for its own People feature -- no bundled face detector.
- Refresh interval and album are configurable from a web UI, no reflashing needed to change them.
Hardware
- ESP32-C6 dev board (8MB flash)
- Waveshare 7.3" E Ink Spectra 6 (E6) panel -- 800x480, 6-color, SPI
See docs/hardware.md for wiring and
docs/architecture.md for how the two halves talk
to each other.
Getting started
server/-- run the FastAPI server first (Docker Compose, points at your Immich instance). Seeserver/README.md.firmware/-- build and flash the ESP32-C6, then scan the QR codes it draws on first boot to provision it. Seefirmware/README.md.
Repo layout
firmware/ ESP-IDF project for the ESP32-C6
server/ FastAPI server: Immich -> crop/dither/pack -> the frame
docs/ Wiring and architecture notes
License
MIT -- see LICENSE. A few small pieces of vendored
third-party code (a QR code generator, a bitmap font table) keep their
own permissive licenses; see LICENSE for details.
Built with substantial assistance from Claude Code.